Houston

24 Hrs Service

Quality Plumbing

Commercial & Residential

Underfloor Heating Repair

• Call Now • (713) 340-7251 • 

Dealing with Heater Problems and Knowing How to Repair

Frequent use and improper practice leads to several problems with one’s heater. When this happens, it is important to understand how heaters work, how it leads to problems, how to identify one, and how to fix it. Normally, trusted companies like Speedway Plumbing Houston Texas can fix the larger concerns and breakages, but there are some heating and air conditioning repair Houston that can be taken care of by homeowners. Here’s a handy guide to follow:

How Heaters Work

Home heaters are relatively simple to understand. Air gets superheated in an evaporator system and releases it. The heat then travels at about 700 feet per minute inside the ducts of your home, where it gets dispersed through various vents located around your indoor space. The thermostats then detect the heat in your surroundings. This provides the heater the information to release more heat or stop it, so that the home won’t get too hot.

The key to exact heating conditions lies in the efficiency of the main heater and the ducts. If the heater is operating as it should be, it will produce the right amount of hot air without consuming too much power. If the ducts are tight and sealed properly, it will prevent leakages, and ensure that the heat that was manufactured is then used to raise the temperature.

What Causes Heaters to Have Problems

There are many reasons why a heater could have problems and why it eventually needs heating air conditioning repair. If the heater loses the ability to generate heat, it’s probably a power concern. Electricity must have been cut off from the main mechanism. It’s also possible that the thermostat is not activated or is broken. If you notice that the temperature produced is not at par with what you heating and air conditioning repair Houstonwanted, there could be leakages in the ducts or there could be blockages in the pipes and lines that brings air to the unit.

If the primary machine is working but there is not heat coming out of the vents, this could be a problem with the ductwork system. These ducts are sometimes affected by the heat and cold that passes through them. They are also affected by vibrations in the house, such as the one caused by construction, or by insects and small animals like rodents. Blockages and leakages may occur, which would then to a loss of heat.

If the machine is producing what you didn’t ask for, this problem could stem from the thermostats. These items are frail and they’re sensitive. The smallest environmental factors can affect them and change your settings. They sometimes can get broken, causing them to misread the temperature of your spaces.

How to Identify Heater Problems

Identifying heater problems is a tricky and complex order. Often, one has to do with thorough checks and numerous studies just to locate the problem. Get your manual as a guide and do the following steps:

heating air conditioning repairWhen a heater doesn’t generate heat, it is important to check if the system is getting electricity. See if all of the power lines are connected. Check if the breakers and fuses are all in order. One should also check the thermostat. Sometimes, a loss of heat could be because someone forgot to activate the thermostat.

For an uneven amount of heat and problems in the vents, one can do an overall check of the ductwork system. Admittedly, this is a difficult process. Unless you have the tools required, it is almost impossible to do. During these cases, the best course of option is to hire the help of experienced professionals such as Plumbing Houston. These experts are capable and knowledgeable to quickly identify the problems and provide a complete and viable solution to the concern.

For malfunctioning thermostats, it’s usually just observing and testing the item itself. Should it not work, don’t bother with hiring someone. Just head to the store, get a compatible replacement and install it in your home.

How to Fix Heater Problems

There are only a few heating and air conditioning repair items that can be done by the typical homeowner.

For heaters that do not generate heat, often the only thins that needs to be done is to ensure that the system is getting the power it requires to function properly. Broken power lines should be repaired. Fuses should be replaced in a breaker. That should do the trick. If those don’t work, it’s already beyond the homeowner’s capacity. The next step should be to call an electrician and let him or her handle the problem. Don’t do it yourself. You might get electrocuted.

heating and air conditioning repair HoustonFor ducts, there are several heating and air conditioning repair Houston steps to do. Blockages and disruptions can be solved by cleaning the duct or replacing the filter. If there are any insect infestations or rodent problems, one might also need to hire a fumigator or an exterminator to terminate the presence of unwanted visitors. After some time, test and see if the air flow is seamless.

For ripped ducts, it’s a bit more complicated. One needs to isolate the specific section of the duct that needs repair and remove it. One should then wipe it clean and then mark the source of the leak. A fab mesh should then be applied. Then finish it off with a generous helping of mastic sealant. Wait for twenty to thirty minutes, put the duct back, and turn on your thermostat.

For duct connections that have been severed, one would need to caulk the seams and joins using caulk mastic, which can be bought at any hardware supply store. Use a putty to cover the seam. Do this thoroughly and wait for half an hour. Afterwards, it should be finished.

For malfunctioning and broken thermostats, one only needs to replace it with a programmable new one.

Don’t let those heating problems get away from you. Follow these heating air conditioning repair steps to ensure that you have the perfect heat temperature in your home.

Schedule Service